Re: cleaner wiring solution needed

["Jackcsg" <nospam@xxxxxxxxxx>]

Where do you get them? I hand them 1/8" bits out like they're hotcakes.

"Crash Gordon®" <NONE@xxxxxxxx> wrote in message
news:CZm1e.36$q_1.1699@xxxxxxxxxxxxxxxxxx
I buy contractor packs of those double-ended 1/8" bits, you ever see them? -
they're tipped at both ends...ya just turn them around and use the other
side...and they're cheap too.


"Jackcsg" <nospam@xxxxxxxxxx> wrote in message
news:4NydnaHdSr0eZ9jfRVn-gA@xxxxxxxxxxxxxxx
> "Robert L. Bass" <robertlbass@xxxxxxxxxxx> wrote in message
> news:5PKdnYUkPOWEftjfRVn-jw@xxxxxxxxxxxxxx
> > > I only use 1078 contacts for recessed installs...
> >
> > That explains it.  That 3/4" hole would accomodate 12-gauge if you
wanted
> > it.  :^)
> >
> > > In fact, other than some tuff concrete filled
> > > doors or a few roll-ups here and there....it's
> > > the only contact I use...
> >
> > I used those on cement filled steel door frames in my old church in CT
> years
> > ago.  It was a royal pain clearing the cement after dulling a new hole
saw
> > arbor.
>
> It's a trade off on the bit. I usually have a nice sharp one to get
through
> the steel, then pull out a practically rounded over one for the blast out.
> It's extremely fun with the drill on roto-hammer. I've had a few customers
> ask "what the f**k are you doing!" It's all good....
>
> > > I just drill out the Motions and Glassbreaks.
> > > I've just noticed better results...
> >
> > Hey, if it works for you that's all that counts.
> >
> > --
> >
> > Regards,
> > Robert L Bass
> >
> > =============================>
> > Bass Home Electronics
> > 2291 Pine View Circle
> > Sarasota · Florida · 34231
> > 877-722-8900 Sales & Tech Support
> > http://www.bassburglaralarms.com
> > =============================>
> >
> >
>
>