[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: programming an Ademco Vista

> Question....Does a motion detector need to have series resisters? =A0Ive
> had people tell me that if its
> configured as a N/C then no series resistor should be installed
> whereas others are saying its should
> be installed.

That is correct.  NC doesn't require a resistor.  Note:  if you have a
spare hardwire zone, try putting the motion on that.  Maybe there is a
problem with the present zone.
alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home