Re: programming an Ademco Vista

["Mark Leuck" <mleuck@xxxxxxxxx>]

<rickm@xxxxxxxxxxxxxx> wrote in message
news:c9e35072-864d-4f01-9575-b5096ae207ec@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Apr 27, 1:56 pm, "Doug" <n...@xxxxxxxx> wrote:
> <ri...@xxxxxxxxxxxxxx> wrote in message
>
> news:2a80aa44-b9c7-45f6-8c40-1617aff96b0a@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> On Apr 27, 12:54 pm, "alarman" <nos...@xxxxxxxx> wrote:
>
>
>
>
>
> > ri...@xxxxxxxxxxxxxx wrote:
> > >The IR motion is not working
> > > though. Ive tried NO ever mode and it fails the walk test. The other
> > > zones report a fault and chime but the IR doesnt report
> > > anything. I enabled the sensor's LED and its getting power and
> > > "see's" movement. I have it set to TYPE4 and NC which
> > > allows the system to come READY. I have the inline resister on the
> > > LO side on the panel.
>
> > I you arm the system but don't open an entry/exit door, the system may
> > bypass the motion detectors, thinking you are still inside.
>
> > --
> > js
>
> > He who laughs last.......thinks the slowest
>
> Interesting point, how can the motion be tested?
>
> If you have programmed the zones for EOL resistors then make sure you are
> using the correct value EOLs.
> If you have programmed the zones for NC then make sure you aren't using
> EOL
> resisotrs.
> Make sure all zones show normal on the keypad.
> Turn the alarm on
> Open and close an entry/exit door.
> Wait for the exit delay to expire and then walk past the motion sensor
> Listen for the siren/bell or whatever audible device you have connected.
>
> Doug- Hide quoted text -
>
> - Show quoted text -

Looks like are 2 issues, the first is that auto-stay was enable so
thats been fixed.  The IR needs to be
set to NC for the system to ready.  I removed the series resistor and
and set it to TYPE10.  The IR still
does not trip the alarm.  I metered the HI/LO terminals and it always
read about 13.4VAC whether the
sensors beams where broken or not as indicated by the LED.  I would
expect it the voltage to drop to
about 3VAC like the door switches.

  Im thinking the IR is broken!     ...anyone agree???

I think the installer is broken