Re: programming an Ademco Vista

["alarman" <nospam@xxxxxxxx>]

rickm@xxxxxxxxxxxxxx wrote:
>The IR motion is not working
> though.  Ive tried NO ever mode and it fails the walk test.  The other
> zones report a fault and chime but the IR doesnt report
> anything.  I enabled the sensor's LED and its getting power and
> "see's" movement.    I have it set to TYPE4 and NC which
> allows the system to come READY.    I have the inline resister on the
> LO side on the panel.


I you arm the system but don't open an entry/exit door, the system may
bypass the motion detectors, thinking you are still inside.

--
js

He who laughs last.......thinks the slowest