Re: programming an Ademco Vista

[rickm@xxxxxxxxxxxxxx]

On Apr 27, 12:54=A0pm, "alarman" <nos...@xxxxxxxx> wrote:
> ri...@xxxxxxxxxxxxxx wrote:
> >The IR motion is not working
> > though. =A0Ive tried NO ever mode and it fails the walk test. =A0The oth=
er
> > zones report a fault and chime but the IR doesnt report
> > anything. =A0I enabled the sensor's LED and its getting power and
> > "see's" movement. =A0 =A0I have it set to TYPE4 and NC which
> > allows the system to come READY. =A0 =A0I have the inline resister on th=
e
> > LO side on the panel.
>
> I you arm the system but don't open an entry/exit door, the system may
> bypass the motion detectors, thinking you are still inside.
>
> --
> js
>
> He who laughs last.......thinks the slowest

Interesting point, how can the motion be tested?