Re: programming an Ademco Vista

["alarman" <nospam@xxxxxxxx>]

rickm@xxxxxxxxxxxxxx wrote:
> On Apr 27, 12:54 pm, "alarman" <nos...@xxxxxxxx> wrote:
>> ri...@xxxxxxxxxxxxxx wrote:
>>> The IR motion is not working
>>> though. Ive tried NO ever mode and it fails the walk test. The other
>>> zones report a fault and chime but the IR doesnt report
>>> anything. I enabled the sensor's LED and its getting power and
>>> "see's" movement. I have it set to TYPE4 and NC which
>>> allows the system to come READY. I have the inline resister on the
>>> LO side on the panel.
>>
>> I you arm the system but don't open an entry/exit door, the system
>> may bypass the motion detectors, thinking you are still inside.
>>
>> --
>> js
>>
>> He who laughs last.......thinks the slowest
>
> Interesting point, how can the motion be tested?

Arm the system, open and close the front door, wait for the exit delay to
expire.

--
js

He who laughs last.......thinks the slowest