[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Napco GEM-RP1CAe2 keypads
"wallstreet123456" wrote:
> Do I have to move a jumper on the main board before I remove the old keypad?
No, you move the jumper to put the system into "config" mode so you can make
certain the keypad isn't locked out. Do that before you buy anything. If
you're nervous about doing this stuff, give me a call and I'll walk you through
it. 941-232-0791.
--
Regards,
Robert L Bass
==============================>
Bass Home Electronics
DIY Alarm and Home Automation Store
http://www.bassburglaralarms.com
Sales & Service 941-870-2310
Fax 941-870-3252
==============================>
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home