Re: Ademco Vista 15P PGM output for armed condition

[mleuck <m.leuck@xxxxxxxxx>]

On Nov 24, 4:36=A0am, "Robert L Bass" <Sa...@xxxxxxxxxxxxxxxxxxxxx>
wrote:
> "Jim Rojas" wrote:
>
> > Tower Security wrote:
> >>> ...you should be able to do it
> >>> exactly the same way as adding an LED that is on when armed, just
> >>> powering a relay to hold the circuit open instead of an LED.
>
> >> Precisely...which still means programming sections 79 and 80 correctly
> >> and I'm hoping that someone has done this previously and can provide
> >> some assistance...
>
> >> Doing this on a DSC is as simple as programming a 17 in section
> >> 009...surely someone can translate this into Ademcobabble?!?...
>
> > I don't even know if you can do it through the keypad on an Ademco Vist=
a
> > 15P...I usually do it through the software. You select a relay and outp=
ut and
> > choose which zones trigger the output, and for whatever condition or re=
ason.
> > DSC is very simplistic. Ademco gets into more details and options when =
it
> > comes to relay outputs.
>
> I hate programming Hoineywell panels, but here's the routine. =A0I *think=
* this is
> correct. =A0:^)
>
> Enter program mode by powering down then back up
> and pressing the *+# simultaneously within 50 seconds
> of power up, or enter the Installer code:
> (4112) + 8 + 0 + 0
>
> Screen displays:
> =A0 =A0 =A0"INSTALLER CODE 20"
> =A0 =A0 =A0Press *80
>
> Screen displays:
> =A0 =A0 =A0"Output Funct #" 01
> =A0 =A0 =A0Press 01*
>
> Screen displays:
> =A0 =A0 =A0"01 A E Trig
> =A0 =A0 =A0?00 0 0 - ZL =3D00"
> =A0 =A0 =A0Press *
>
> Screen Displays:
> =A0 =A0 =A0"01 Activated By: Delete 0"
> =A0 =A0 =A0Press 2
>
> Screen will display:
> =A0 =A0 =A0"01 Enter Zone Type"
> =A0 =A0 =A0Press 21 =3D Arming-AWAY
>
> After this:
> =A0 =A0 =A0Press *
> =A0 =A0 =A0Press *
>
> Screen displays:
> =A0 =A0 =A0"Output action"
> =A0 =A0 =A0Press 2 =3D Close and Stay Closed
>
> Screen displays:
> =A0 =A0 =A0"Enter Output No."
> =A0 =A0 =A0Press 17 =3D Trigger 1
> =A0or
> =A0 =A0 =A018 =3D Trigger 2
>
> Screen displays summery:
> =A0 =A0 =A0"01 A E Trig
> =A0 =A0 =A0?00 0 0 - ZL =3D00"
> =A0 =A0 =A0Press *
>
> Screen displays "Output Funct #"
> =A0 =A0 =A0Press 00 to quit
>
> Hope that helps.
>
> --
>
> Regards,
> Robert L Bass

Have fun helping him when his keypad goes blank after hitting *80