Re: programming an Ademco Vista

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

You know that Type 10 Interior WILL ALWAYS BE DELAYED...is that what you
want?
That means if someone comes in through a broken window it will NOT be an
instant alarm EVER, it will always have the delay.



--
**Crash Gordon**







<rickm@xxxxxxxxxxxxxx> wrote in message
news:c858d0ab-36f2-4324-b0f4-2e83a886470e@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> On Apr 27, 9:31 pm, "Mark Leuck" <mle...@xxxxxxxxx> wrote:
>> <ri...@xxxxxxxxxxxxxx> wrote in message
>>
>> news:c9e35072-864d-4f01-9575-b5096ae207ec@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> On Apr 27, 1:56 pm, "Doug" <n...@xxxxxxxx> wrote:
>>
>>
>>
>>
>>
>> > <ri...@xxxxxxxxxxxxxx> wrote in message
>>
>> >news:2a80aa44-b9c7-45f6-8c40-1617aff96b0a@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> > On Apr 27, 12:54 pm, "alarman" <nos...@xxxxxxxx> wrote:
>>
>> > > ri...@xxxxxxxxxxxxxx wrote:
>> > > >The IR motion is not working
>> > > > though. Ive tried NO ever mode and it fails the walk test. The
>> > > > other
>> > > > zones report a fault and chime but the IR doesnt report
>> > > > anything. I enabled the sensor's LED and its getting power and
>> > > > "see's" movement. I have it set to TYPE4 and NC which
>> > > > allows the system to come READY. I have the inline resister on the
>> > > > LO side on the panel.
>>
>> > > I you arm the system but don't open an entry/exit door, the system
>> > > may
>> > > bypass the motion detectors, thinking you are still inside.
>>
>> > > --
>> > > js
>>
>> > > He who laughs last.......thinks the slowest
>>
>> > Interesting point, how can the motion be tested?
>>
>> > If you have programmed the zones for EOL resistors then make sure you
>> > are
>> > using the correct value EOLs.
>> > If you have programmed the zones for NC then make sure you aren't using
>> > EOL
>> > resisotrs.
>> > Make sure all zones show normal on the keypad.
>> > Turn the alarm on
>> > Open and close an entry/exit door.
>> > Wait for the exit delay to expire and then walk past the motion sensor
>> > Listen for the siren/bell or whatever audible device you have
>> > connected.
>>
>> > Doug- Hide quoted text -
>>
>> > - Show quoted text -
>>
>> Looks like are 2 issues, the first is that auto-stay was enable so
>> thats been fixed. The IR needs to be
>> set to NC for the system to ready. I removed the series resistor and
>> and set it to TYPE10. The IR still
>> does not trip the alarm. I metered the HI/LO terminals and it always
>> read about 13.4VAC whether the
>> sensors beams where broken or not as indicated by the LED. I would
>> expect it the voltage to drop to
>> about 3VAC like the door switches.
>>
>> Im thinking the IR is broken! ...anyone agree???
>>
>> I think the installer is broken- Hide quoted text -
>>
>> - Show quoted text -
>
> why?