Re: Problem with Battery Recharging in Lynx-R

["Jack" <jack@xxxxxxxxxxxxx>]

"Mark Leuck" <m..leuck@xxxxxxxxx> wrote in message
news:46f72ca1$0$26336$4c368faf@xxxxxxxxxxxxxxxxx
>
> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:46f7274e$0$498$815e3792@xxxxxxxxxxxxxxxxx
>> I wouldn't mark them with anything...you just finished cleaning them!
> With
>> the drawer out you should be able to see down in there. If it looks like
> the
>> pins line up with the notches in the bottom of the battery drawer AND
>> there's tape or foam (or whatever) over the battery in that area; remove
> it.
>>
>> I couldn't find any Honeywell sheets on that battery pack, so I can't be
>> sure about any of this. All ref. material I can find shows the battery
> pack
>> with the wire leads and tiny molex-type plug on it.
>>
>>
>>
>> --
>> Crash Gordon
>> -------ouch------
>
> They had 3 battery configurations in the early panels, one had 2 large
> metal
> prongs that sometimes didn't line up when you put the front back on the
> base, he might have that?
>
Mark this is the one I have. It has the two gold metal prongs. I did confirm
that the two prongs were lining up with the slots at the bottom of the
battery drawer. I don't know, if anyone can answer this, but there is a
green LED that is lit next to the right prong, but the left one is not lit.
Should the left LED be lit also?