Re: PC5132-433 NA (Version 4.2)

["Claude Rodriguez" <clauderodriguez@xxxxxxxxxxx>]

Thanks for the pointers, shady.  All good advice --Claude

> that would work as well... but there are four things to consider when
> doubling up zones...
>
> - don't mix entry zones with instant perimeter or interior zones... you
> don't want someone breaking in and having that extra time... and you also
> don't want to have the chime enabled on a motion
>
> - when wiring them together, they should be wired in series and only have
> one resistor in the loop... so you may have to go around and take a few
> resistors out... otherwise, the zones will just stay open
>
> - if you ever have false alarms on a zone with more than one device, it
> can be very difficult to determine which device it is without separating
> them all back to individual zones again
>
> - after you have everything finalized... make sure your monitoring company
> (assuming you're being monitored) knows what all the zones are and send in
> signals for everything