Re: Programming problem on Vista 20P

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

"Crash Gordon®" <NONE@xxxxxxxx> wrote in message
news:jqRbe.18$7A1.8456@xxxxxxxxxxxxxxxxxx
Tech support says that the TM should be mounted between 1-2' from the
reciever antenna on the same plane (ADT had installed it 2" from the
reciever). They also recommend moving the reciever & TM up above the
mirrored doors (DUH)...currently they're both mounted about 12" from the
floor...and too close to each other.

Kinda what I suspected.

He could not find any mention of voltage drop while siren was running in
tech data regarding this particular revision...he said maybe on an earlier
rev. This one turns out to be rev 12 (1997+)

Ademco doesn't have that voltage drop problem, if you're over the limit
you'll get one blip out of the siren and the system dies for a few seconds