[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Programming problem on Vista 20P

Subject: Re: Programming problem on Vista 20P
From: "RJD314" <rdvorak314@xxxxxxx>
Date: 24 Apr 2005 15:37:35 -0700
Newsgroups: alt.security.alarms
References: <EImdnWulaJRCA_ffRVn-jg@xxxxxxxxxxx>

The 6150RF keypad default wireless receceiver address is 00.  Make sure
the keypad is seated correctly on the backplate.  If the tamper switch
is tripped, the 20p will display a "Check 100 RF Receiver".  Try
holding the tamper manually for a couple of minutes to see if the
"Check 100 RF Receiver" restores.

Follow-Ups:
- Re: Programming problem on Vista 20P
  - From: Mark Leuck
- Re: Programming problem on Vista 20P
  - From: Crash Gordon®

References:
- Programming problem on Vista 20P
  - From: Mike

Prev by Message: Re: Fire Side Chat -- Fire Alarm Code Issue
Next by Message: Re: Here's one for the books
Previous by thread: Re: Programming problem on Vista 20P
Next by thread: Re: Programming problem on Vista 20P
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home