[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Programming problem on Vista 20P

Subject: Re: Programming problem on Vista 20P
From: "Mark Leuck" <m..leuck@xxxxxxxxxxx>
Date: Sun, 24 Apr 2005 18:15:46 -0500
Newsgroups: alt.security.alarms
References: <EImdnWulaJRCA_ffRVn-jg@xxxxxxxxxxx> <1114382255.239870.85570@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

That keypad may not have a tamper switch, Honeywell took them out a while
back

"RJD314" <rdvorak314@xxxxxxx> wrote in message
news:1114382255.239870.85570@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> The 6150RF keypad default wireless receceiver address is 00.  Make sure
> the keypad is seated correctly on the backplate.  If the tamper switch
> is tripped, the 20p will display a "Check 100 RF Receiver".  Try
> holding the tamper manually for a couple of minutes to see if the
> "Check 100 RF Receiver" restores.
>

Follow-Ups:
- Re: Programming problem on Vista 20P
  - From: Mike

References:
- Programming problem on Vista 20P
  - From: Mike
- Re: Programming problem on Vista 20P
  - From: RJD314

Prev by Message: Re: Do You Want To Know For Sure That You Are Going To Heaven? The reason some people don't know for sure if they are going to Heaven when they die is because they just don't know. The good news is that you can know for sure that you are going to Heaven wh
Next by Message: Re: CADDX NX-6 question from homeowner
Previous by thread: Re: Programming problem on Vista 20P
Next by thread: Re: Programming problem on Vista 20P
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home