[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Programming problem on Vista 20P

Subject: Re: Programming problem on Vista 20P
From: Crash Gordon® <NONE@xxxxxxxx>
Date: Sun, 24 Apr 2005 16:01:15 -0700
Newsgroups: alt.security.alarms
References: <EImdnWulaJRCA_ffRVn-jg@xxxxxxxxxxx> <1114382255.239870.85570@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Thats weird...the one I did yesterday was set to default 31, I had to =
change it to 16 to be seen by the panel.


"RJD314" <rdvorak314@xxxxxxx> wrote in message =
news:1114382255.239870.85570@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> The 6150RF keypad default wireless receceiver address is 00.  Make =
sure
> the keypad is seated correctly on the backplate.  If the tamper switch
> is tripped, the 20p will display a "Check 100 RF Receiver".  Try
> holding the tamper manually for a couple of minutes to see if the
> "Check 100 RF Receiver" restores.
>=20
>

Follow-Ups:
- Re: Programming problem on Vista 20P
  - From: Mark Leuck
- Re: Programming problem on Vista 20P
  - From: Crash Gordon®

References:
- Programming problem on Vista 20P
  - From: Mike
- Re: Programming problem on Vista 20P
  - From: RJD314

Prev by Message: YAWN
Next by Message: Re: Open letter to the Moderator fool
Previous by thread: Re: Programming problem on Vista 20P
Next by thread: Re: Programming problem on Vista 20P
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home