[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: which x10 transceiver module to use?

Subject: Re: which x10 transceiver module to use?
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Thu, 19 Jul 2007 19:04:31 GMT
Newsgroups: comp.home.automation
References: <468b6ea1.920544375@xxxxxxxxxxxxx> <1183550491.961495.12690@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <468bc46d.942508390@xxxxxxxxxxxxx> <1183611610.869264.53190@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1183720812.179484.173710@xxxxxxxxxxxxxxxxxxxxxxxxxxx> <1183722933.449518.122750@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <468e4c80.1108416125@xxxxxxxxxxxxx> <1183745255.485188.266780@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1184847242.222320.147540@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

arnie <parvezat6@xxxxxxxxxxxxxx> wrote:

>Can we control PMS02/MS14A using PLC [2414U] through RTM75??
>If yes then how??
>Thanks
>Arnie

No! You cannot "control" the PMS02/MS14A. They are one-way devices that only
send RF codes to a transceiver. They do not receive commands. They have no
RF receiver section nor do they have a powerline interface.

References:
- Re: which x10 transceiver module to use?
  - From: Dave Houston
- Re: which x10 transceiver module to use?
  - From: arnie
- Re: which x10 transceiver module to use?
  - From: Dave Houston
- Re: which x10 transceiver module to use?
  - From: arnie
- Re: which x10 transceiver module to use?
  - From: ved_dhuru
- Re: which x10 transceiver module to use?
  - From: arnie
- Re: which x10 transceiver module to use?
  - From: Dave Houston
- Re: which x10 transceiver module to use?
  - From: radhika . dhuru
- Re: which x10 transceiver module to use?
  - From: arnie

Prev by Message: Re: making money
Next by Message: Re: Neutral terminal on X-10 type wall switch
Previous by thread: Re: which x10 transceiver module to use?
Next by thread: Re: which x10 transceiver module to use?
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home