[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: which x10 transceiver module to use?

Subject: Re: which x10 transceiver module to use?
From: arnie <parvezat6@xxxxxxxxxxxxxx>
Date: Wed, 04 Jul 2007 05:01:31 -0700
Newsgroups: comp.home.automation
References: <1183533835.827573.259090@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <468b6ea1.920544375@xxxxxxxxxxxxx>

yes i forget to mention about RF transceiver module RTM75 it is also
in the circuit. As mentioned in your if through this transceiver the
lamp module is getting turned on then why the PLC is not getting any
feedback of the transceiver activity. I have tried connecting it both
in the same phase as PLC as well in another phase. Though the lamp
module gets turned ON on motion detction but i do not see anything in
the PLC  command window related to this
Thanks
Arnie

Follow-Ups:
- Re: which x10 transceiver module to use?
  - From: Dave Houston

References:
- which x10 transceiver module to use?
  - From: arnie
- Re: which x10 transceiver module to use?
  - From: Dave Houston

Prev by Message: Re: reterive status of x10 devices using c#
Next by Message: Re: which x10 transceiver module to use?
Previous by thread: Re: which x10 transceiver module to use?
Next by thread: Re: which x10 transceiver module to use?
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home