Re: Insteon with 400amp service (2 panels)

[Robert L Bass <sales@xxxxxxxxxxxxxxxxxxxxx>]

> I figured mine out the hard way...by looking at it ;)  You can either
> start popping breakers out and look at how the bus is designed, or try
> to find some online documentation for the model that you have, or ask
> the electrician, or call the manufacturer, or post the model number
> here, etc...

You can also place a voltmeter across the wire holding screws on
adjacent breakers and read the voltage.  In about one minute
you'll know the precise layout of your panel.  Draw a simple
schematic on a 3x5 card and stick it to the door below the label.

BTW, the label on the inside of the panel door usually has phase
markings on.  Mine does.

--

Regards,
Robert L Bass

Bass Burglar Alarms
The Online DIY Store
http://www.BassBurglarAlarms.com