[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Andersen 400 Series Security contacts

Subject: Re: Andersen 400 Series Security contacts
From: "Buggs" <thatsallfolksl@xxxxxxxxx>
Date: Mon, 6 Aug 2007 22:19:31 -0700
Newsgroups: alt.security.alarms
References: <1186368513.225004.92710@xxxxxxxxxxxxxxxxxxxxxxxxxxx> <46b69264$0$505$815e3792@xxxxxxxxxxxxxx> <1186371072.533672.213860@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <46b6ab5d$0$516$815e3792@xxxxxxxxxxxxxx> <1186452542.854372.290470@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <6xRti.52442$vS1.51160@xxxxxxxxxxxx> <46b7f96a$0$10306$815e3792@xxxxxxxxxxxxxx>

Crash Gordon wrote:
> I wouldn't ever use a spade bit on an expensive window...infact I've
> stopped using 3/8" spade bits for press fit contacts altogether...no
> matter how careful you are the hole is always slightly too big for
> the switch.
>
> I like the split tip or the split brad point bits the best. I use the
> spades for rough work and big ship augers for new construction
> rough-ins.

I like the brad point bits the best. Spades work ok, haven't had any
trouble.
js

References:
- Andersen 400 Series Security contacts
  - From: k_fern2002
- Re: Andersen 400 Series Security contacts
  - From: Crash Gordon
- Re: Andersen 400 Series Security contacts
  - From: k_fern2002
- Re: Andersen 400 Series Security contacts
  - From: Crash Gordon
- Re: Andersen 400 Series Security contacts
  - From: Jim
- Re: Andersen 400 Series Security contacts
  - From: Buggs
- Re: Andersen 400 Series Security contacts
  - From: Crash Gordon

Prev by Message: Re: DSC 4020 CF
Next by Message: Re: the police was dispatched to ... the wrong house
Previous by thread: Re: Andersen 400 Series Security contacts
Next by thread: Re: Andersen 400 Series Security contacts
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home