[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: reterive status of x10 devices using c#



arnie <parvezat6@xxxxxxxxxxxxxx> wrote:

>while querying LM14A [one that i do not have currently] will the
>response also contains the address [house code+unit code] of the
>device that is responding to our query so that we know from which
>device the status is being received
>Arnie

No, you will only get "Housecode Status On" or "Housecode Status Off".
However, with extended codes, you can get a response from the LM14A that
identifies the device.

I will repeat my earlier suggestion that many of the Smarthome made
Lamplincs and Switchlincs will respond to Status Request with the actual
level as well as report all changes.

http://www.smarthome.com/_/Dimmers_Lighting_Appliance_Control/INSTEON/Plug_in_Screw_In_Modules/_/z/23b/1Qd/nav.aspx
http://www.smarthome.com/_/Dimmers_Lighting_Appliance_Control/Dimmers_Wall_Switches_Keypads_Touchscreens/INSTEON/Wall_Switches_Dimmers/_/z/1QV/23b/2MD/nav.aspx

They can all be configured to respond to X-10 signals.


comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home