[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: reterive status of x10 devices using c#

Subject: Re: reterive status of x10 devices using c#
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Tue, 03 Jul 2007 14:44:28 GMT
Newsgroups: comp.home.automation
References: <1183357289.697523.166680@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <4688db2b.751723140@xxxxxxxxxxxxx> <1183377079.182159.211100@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <pan.2007.07.02.16.01.14.418636@xxxxxxxxxxxx> <1183445441.881193.147970@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <pan.2007.07.03.11.53.01.89336@xxxxxxxxxxxx> <1183467170.394727.122600@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

arnie <parvezat6@xxxxxxxxxxxxxx> wrote:

>Supply voltage is 110V

Single phase or 3-phase? The Powerlinc will send only to the one phase into
which it is plugged. Other PLC interfaces (e.g. CM11A) will send to all
three phases but do so based on 60Hz timing which will not work with your
110V/50Hz power.

Anand Dhuru, who has done quite a bit in designing and modifying X-10
modules to work in your country, might be able to suggest other
possibilities.

Follow-Ups:
- Re: reterive status of x10 devices using c#
  - From: arnie

References:
- reterive status of x10 devices using c#
  - From: arnie
- Re: reterive status of x10 devices using c#
  - From: Dave Houston
- Re: reterive status of x10 devices using c#
  - From: arnie
- Re: reterive status of x10 devices using c#
  - From: Charles Sullivan
- Re: reterive status of x10 devices using c#
  - From: arnie
- Re: reterive status of x10 devices using c#
  - From: Charles Sullivan
- Re: reterive status of x10 devices using c#
  - From: arnie

Prev by Message: [no subject]
Next by Message: Re: HVAC Actuator controls (4-20mA or 0-10V?)
Previous by thread: Re: reterive status of x10 devices using c#
Next by thread: Re: reterive status of x10 devices using c#
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home