[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Some installers should not be working on advanced panels
They should put a very big note in Vista 32FB- 128 FB BP etc. As Well
as NX-8 etc etc.
WARNING THIS PANEL IS TO BE INSTALLED AND PROGRAMMED ONLY BY
EXPERIENCED INSTALLERS. DO NOT ATTEMPT TO PROGRAM BY HAND UNLESS YOU
KNOW EXACTLY WHAT YOU ARE DOING OR YOU COULD PUT LIFE AND PROPERTY AT
RISK.
THIS PANEL HAS EXTENSIVE MENUS AND ADVANCED FUNCTIONS ONLY A
QUALIFIED TECH WILL FULLY UNDERSTAND.
IF YOU ARE NOT SURE KEEP YOUR HANDS OFF AND PUT YOUR SCREW DRIVER DOWN
AND GET SOME ONE WHO DOES.
Once again I found some fucking idiot installers who tried to install
addressable smokes on the 2 wire loop could not get it working so they
just turned off zone and left it disabled over year 1/2 ago.
Could not get heat loop working had series and parallel resistors on
it. so they disabled it and told no one .
had wrong resistors where the hell they came up with 10 k resistors
when only 2 k come with panels.
This was a 3 million dollar home and there where no 120 daisy chain
smokes in residence.
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home