Re: Vista 20 and IR motion problem

["Doug" <not@xxxxxxxx>]

<rickm@xxxxxxxxxxxxxx> wrote in message
news:2119663e-1788-4d64-9dad-ab97e2d224a9@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> On Apr 30, 4:40 am, Red <RedN...@xxxxxxxxx> wrote:
>> On Tue, 29 Apr 2008 23:56:53 -0500, "Mark Leuck" <mle...@xxxxxxxxx>
>> wrote:
>>
>> >I removed one wire from the sensor, closed the tamper switch and it
>> >read about 7ohms
>> >with no movement and no LED, infinite with movement and LED lite.
>>
>> >Next I reconnected the sensor and repeated the test at the panel with
>> >both wired removed. It read
>> >about 185 ohms and then infinite with movement.
>>
>> >If I check the voltage, there is about 13V across the terminals
>> >regardless of movement.
>>
>> >Walk away and get someone who knows what they are doing, you obviously
>> >don't
>>
>> Must be an engineer.  His own time is worthless and needs to screw
>> around with cheap crap.  This is taking him a week to do something
>> that a tech can do in 2 minutes.
>>
>> Ask an engineer what time it is and he'll tell you how to build a
>> watch.
>
> feel free to send me the solution

You've been told the solution, or how to find the solution several times by
different people.
At this point I have to assume you're either a troll or just so dense the
only way you will resolve it is by pure unadulterated luck.

Doug