Re: Vista 20 and IR motion problem

[rickm@xxxxxxxxxxxxxx]

On Apr 30, 4:40 am, Red <RedN...@xxxxxxxxx> wrote:
> On Tue, 29 Apr 2008 23:56:53 -0500, "Mark Leuck" <mle...@xxxxxxxxx>
> wrote:
>
> >I removed one wire from the sensor, closed the tamper switch and it
> >read about 7ohms
> >with no movement and no LED, infinite with movement and LED lite.
>
> >Next I reconnected the sensor and repeated the test at the panel with
> >both wired removed. It read
> >about 185 ohms and then infinite with movement.
>
> >If I check the voltage, there is about 13V across the terminals
> >regardless of movement.
>
> >Walk away and get someone who knows what they are doing, you obviously don't
>
> Must be an engineer.  His own time is worthless and needs to screw
> around with cheap crap.  This is taking him a week to do something
> that a tech can do in 2 minutes.
>
> Ask an engineer what time it is and he'll tell you how to build a
> watch.

feel free to send me the solution