Re: Vista 20 and IR motion problem

[Red <RedNick@xxxxxxxxx>]

On Tue, 29 Apr 2008 23:56:53 -0500, "Mark Leuck" <mleuck@xxxxxxxxx>
wrote:

>I removed one wire from the sensor, closed the tamper switch and it
>read about 7ohms
>with no movement and no LED, infinite with movement and LED lite.
>
>Next I reconnected the sensor and repeated the test at the panel with
>both wired removed. It read
>about 185 ohms and then infinite with movement.
>
>If I check the voltage, there is about 13V across the terminals
>regardless of movement.
>
>
>
>Walk away and get someone who knows what they are doing, you obviously don't

Must be an engineer.  His own time is worthless and needs to screw
around with cheap crap.  This is taking him a week to do something
that a tech can do in 2 minutes.

Ask an engineer what time it is and he'll tell you how to build a
watch.