Re: Vista 20 and IR motion problem

[Roger W <allucan8@xxxxxxx>]

On Apr 29, 11:18=A0pm, ri...@xxxxxxxxxxxxxx wrote:
> The Vista 20P door sensors work great but the IR motion does not. =A0If
> its set to N/C then the system does
> not come ready however its set to N/O then it does which of course is
> wrong. =A0The programmng summary
> looks like this:
>
> ZN =A0ZT =A0P =A0RC =A0HW : RT
> 05 =A004 =A01 =A0 10 =A0 NC =A0 =A0 1
>
> The motion detect was working on the old Ademco 4030 panel and the LED
> lights with movement. =A0Ive read
> through the manual cover to cover as well as the programming guide
> many times and motion detectors are
> not even mentioned.
>
> Any suggestions would be greatly appreciated

Sounds like you have defective wiring or most likely a defective
motion.
Wire up the Aurora and if your problem clears, you'll know what to do.