Re: Vista 20 and IR motion problem

[Frank Olson <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>]

rickm@xxxxxxxxxxxxxx wrote:
> On Apr 29, 9:56 pm, "Mark Leuck" <mle...@xxxxxxxxx> wrote:
>> <ri...@xxxxxxxxxxxxxx> wrote in message
>>
>> news:5c28aa30-ecb6-4195-b574-8b297cdb74f0@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> On Apr 29, 9:17 pm, Roger W <alluc...@xxxxxxx> wrote:
>>
>>
>>
>>
>>
>>> On Apr 29, 11:18 pm, ri...@xxxxxxxxxxxxxx wrote:
>>>> The Vista 20P door sensors work great but the IR motion does not. If
>>>> its set to N/C then the system does
>>>> not come ready however its set to N/O then it does which of course is
>>>> wrong. The programmng summary
>>>> looks like this:
>>>> ZN ZT P RC HW : RT
>>>> 05 04 1 10 NC 1
>>>> The motion detect was working on the old Ademco 4030 panel and the LED
>>>> lights with movement. Ive read
>>>> through the manual cover to cover as well as the programming guide
>>>> many times and motion detectors are
>>>> not even mentioned.
>>>> Any suggestions would be greatly appreciated
>>> Sounds like you have defective wiring or most likely a defective
>>> motion.
>>> Wire up the Aurora and if your problem clears, you'll know what to do.-
>>> Hide quoted text -
>>> - Show quoted text -
>> I removed one wire from the sensor, closed the tamper switch and it
>> read about 7ohms
>> with no movement and no LED, infinite with movement and LED lite.
>>
>> Next I reconnected the sensor and repeated the test at the panel with
>> both wired removed. It read
>> about 185 ohms and then infinite with movement.
>>
>> If I check the voltage, there is about 13V across the terminals
>> regardless of movement.
>>
>> Walk away and get someone who knows what they are doing, you obviously don't- Hide quoted text -
>>
>> - Show quoted text -
>
> what is wrong with this post and isnt that what this group is for?


Actually, no.  This isn't what this group is for.  We're not here to
help DIYer's specifically.  This is a forum for professionals to discuss
industry related topics and generally let off a little steam.

http://yoursecuritysource.com/asafaq.htm