Re: Napco 2600 question

["Jim" <alarminex@xxxxxxx>]

On Feb 13, 6:20=EF=BF=BDpm, "Mark Leuck" <m..le...@xxxxxxxxx> wrote:
> "Jim" <alarmi...@xxxxxxx> wrote in message
>
> news:1171347544.854848.118350@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> > On Feb 12, 11:54?pm, "Mark Leuck" <m..le...@xxxxxxxxx> wrote:
> > > Ademco Express if I recall, almost Contact ID
>
> > > I just thought it was silly to enter all that data when SIA and CID w=
ere
> > > automatic however he installs Napco which has severe limitations on w=
hat
> > > type of signal can be sent with either format and you still have to
> enter in
> > > the proper report codes for the zones unlike just about any other bra=
nd
> > > which sends the zone type automatically.
>
> > On which panels are you talking about?
>
> 816 to the X-255, I thought you were using the 3200 at the time
>
> > With =A0CID, you just have to pick burg, fire, panic etc. when you
> > configure the zone.
>
> Right and thats the problem, Napco doesn't give you enough reporting
> options, for instance you can't send a CID or SIA signal for waterflow,
> freeze etc


I don't do commercial anymore and wouldn't use Napco for that anyway.
But.....
 are you saying that a Napco panel can't use CID if you want to hook a
low temp alarm to it?

Just to save a little time ... I know your answer is no.

So obviously ..... it isn't a problem then.