[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: which x10 transceiver module to use?

Subject: Re: which x10 transceiver module to use?
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Thu, 05 Jul 2007 10:49:09 GMT
Newsgroups: comp.home.automation
References: <1183533835.827573.259090@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <468b6ea1.920544375@xxxxxxxxxxxxx> <1183550491.961495.12690@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <468bc46d.942508390@xxxxxxxxxxxxx> <1183611610.869264.53190@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

I should add that each X-10 device that transmits to the powerline also
loads the line and attenuates the signal. The more two-way devices in use,
the more signal strength problems you will experience.

References:
- which x10 transceiver module to use?
  - From: arnie
- Re: which x10 transceiver module to use?
  - From: Dave Houston
- Re: which x10 transceiver module to use?
  - From: arnie
- Re: which x10 transceiver module to use?
  - From: Dave Houston
- Re: which x10 transceiver module to use?
  - From: arnie

Prev by Message: Re: which x10 transceiver module to use?
Next by Message: Re: which x10 transceiver module to use?
Previous by thread: Re: which x10 transceiver module to use?
Next by thread: Re: which x10 transceiver module to use?
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home