Re: x10 activehome pro

["Tim Dolan" <tims-pool-leagues@xxxxxxxx>]

Good morn'n John,
                         BTW does this group favor top posting or bottom
posting?
    Replying to your follow up: Yes, a unit responds to the hand held and I
can see and hear the sound effects the screen AHP.
Also, I can see and hear the sound effects when I move the switch off and on
with the mouse but the light does not respond.
Also, I have the AHP unit connected to the back of the computer.
John, if I unplug the AHP unit and remove the batteries, do I then
re-install and re d/l my exiting file?
                  Tim fm CT
"John" <noaddress@xxxxxxxxxxxxxxxxx> wrote in message
news:G6GdnXXxrLsZHSfYnZ2dnUVZ_u2mnZ2d@xxxxxxxxxxxxxx
>
> "Tim Dolan" <tims-pool-leagues@xxxxxxxx> wrote in message
> news:QLtuh.4468$O02.1470@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> John, & Dave,
>>                    thank you for your replies.
>> In answer to your questions and suggestions:
>> Yes, the box is checked to d/l to interface
>> Yes the time zone is correct
>> Signal suckers? I do have TV's, computer and a power supply for power
>> outages.
>> I have a capacitor installed to link the phases.
>> The transceiver enabled box was on auto and I changed it to "specific"
>> and selected "A"
>> I only have one Transceiver.
>> New symptom: now the switches do not work either the screen of the Active
>> Home Pro but the hand held remotes work just fine.
>> Thanks again.
>>
> It sounds like you are having USB interface problems.
> Set the monitored house code to A and do a download to the
> interface.
> Change the state of a light using an RF type control (palm pad etc)
> and see if the state change is reflected in the AHP screen display of
> that module.
> If you are using an external USB hub, change the connection so the
> CM15A is connected directly to the computer.
> There have been reports of the USB interface going to sleep.  So
> far it hasn't happened to mine but the only cure that I have heard
> is to unplug the unit and remove the batteries.
>
> Are you aware of the X10 forum?
>
> http://www.x10community.com/forums/index
>
>
>