[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: BX-AHT aerial
RG58/U is always 50-ohm and while BNC connectors are available in 50 or 75
ohm ratings I'm sure they used 50-ohm connectors with 50-ohm coax. I use the
one with the BNC connectors CAT# CBL-25.
"Robert Green" <ROBERT_GREEN1963@xxxxxxxxx> wrote:
>Would either one of these be acceptable aerial wire:
>
>http://www.allelectronics.com/cgi-bin/item/RG-58U/search/RG-58_U_COAX_CABLE,
>_50_OHM_.html
>
>http://www.allelectronics.com/cgi-bin/item/CBL-25/121/25"#39;_BNC-BNC_CABLE,
>_RG58_U_.html
>
>I see that most places where they talk about impedance, they list RG-58U as
>50 ohm. I'd rather get the one with BNC connectors already in place, but I
>am not sure they are 50 ohms.
>
>Thanks!
comp.home.automation Main Index |
comp.home.automation Thread Index |
comp.home.automation Home |
Archives Home