[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: X10 signal problems...
Mike, What happens if the transformer is unplugged and just the module
is left plugged in?
From:mike2711@xxxxxxxxx
mike2711@xxxxxxxxx
> Hi Bob! The module which is actually an X10 receptacle is about 2 feet
> from the controller BUT in doing some more reading, I realized the
> photocell, which was installed in place of an outdoor outlet, might be
> passing through a GFCI outlet in the garage before it gets to any
> modules.... This is the next thing to check but from what I read, most
> people don't have problems with X10 signals getting through GFCI
> outlets.
comp.home.automation Main Index |
comp.home.automation Thread Index |
comp.home.automation Home |
Archives Home