Re: Can't address pull stationsight 5808 on Silent Knight panel.

[secure15 <secure15@xxxxxxxxxxxxx>]

paul@xxxxxxxxxxxxx wrote:
> On Mar 21, 5:28 pm, secure15 <secur...@xxxxxxxxxxxxx> wrote:
>> Genius.....
>> You Don't "address" SK pull Stations via the SLC program Port on the Panel!
>> They are either made as a Standard Pull with NO SD500 MIM (mini input
>> module) or With the MIM preinstalled on the back of the Pull. If it's
>> not there,
>> You need to provide MIM for each of your Pulls -----UNLESS they are
>> preinstalled with the Pull---- There is NO DATA being sent from an SK
>> pull--- they are merely Point Addressable Inititating Devices---
>> Programmed via the "DIPS" on the MIM!
>>
>>
>>
>> Frank Olson wrote:
>>> p...@xxxxxxxxxxxxx wrote:
>>>> On Mar 21, 2:55 pm, Frank Olson
>>>> <use_the_email_li...@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>>>>> p...@xxxxxxxxxxxxx wrote:
>>>>>> On Mar 21, 1:41 pm, "p...@xxxxxxxxxxxxx" <p...@xxxxxxxxxxxxx> wrote:
>>>>>>> Can't address pull stationsight 5808 on silent Knight panel.
>>>>>>> Boy, am I frustrated!!..    Manual says just hook unit to 2 terminals
>>>>>>> named SLC program,  follow menu instructions and the unit is
>>>>>>> programmed.  I keep getting "connecting to device" but it never does!!
>>>>>>> What am I doing wrong?
>>>>>>> I have the correct +on SLC on panel and SLC on Unit.
>>>>>>> I have the pull station address set for 1.
>>>>>>> Any suggestions for what I can do?
>>>>>>> PS  Silent Knight tech support closed for Easter today.   Thanks
>>>>>> Model number of pull station is SD 500 Ps
>>>>>> This is a new panel. I am tryiny to set 1 pullstation to address 1.
>>>>>> I have verified correct polarity
>>>>>> The panel has 3 sets of SLC terminals.
>>>>>> ...SLC in  (I am not using)
>>>>>> ...SLC out (I am not using at this time.  Manual sys to connect to SLC
>>>>>> Program to address)
>>>>>> ...SLC Program.  IO am using these terminals
>>>>>>    Side Note: I do not have voltage at SLC Program terminals but I do
>>>>>> have voltage on SLC Progam terminals
>>>>> Connect the pull station to the SLC "out" terminals.  Observe proper
>>>>> polarity.  You won't have a problem.- Hide quoted text -
>>>>> - Show quoted text -
>>>> Sorry Frank, that doesn's work either.
>>>> All I need to do is set the address on 16 smoke detectors SD 505 APs
>>>> And 13 Pullstations SD 500 Ps.
>>>> Manual says connect to SLC Program terminals and follow menu to set
>>>> address.
>>>> Keeps saying " No device found "  when I try to read it or
>>>> "Connecting" when I try to write it.
>>>> I have wasted all day on this problem.  AAAAAAAA!!!!!!!!!!!
>>> Any way for you to send me the manual?- Hide quoted text -
>> - Show quoted text -
>
> Ok Genius responder,
> I already figured the pulls out.  I used the dip switches to program
> them.  I still need to know how to program the smokes.  They don't
> have dip switches!!!
Any "Genius" tech who goes out into the field with a New Panel and
doesn't know how to program it .........???????
Who wants to hold his hand????