[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Firewolf 4-wire Napco 816 gives E41



"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:46dc3a32$0$3581$815e3792@xxxxxxxxxxxxxxxxx
> Standby for the supervision relay episode.
>
>
Will the Caped Crusader defeat the evil wire monster. Tune in next week,
same bat time, same bat channel.............. Sorry, I lost my mind for a
moment..... :-))
>
>
>
>
>
> "Buggs" <thatsallfolksl@xxxxxxxxx> wrote in message
> news:5iWCi.96906$Vk6.199@xxxxxxxxxxxxxxx
> | Total nerd wrote:
> | > Okay, now I'm totally stumped.
> | > I moved it to Zone 8 with the same problem.  I ran a new set of wires
> | > out in the open across the floor just to make sure I didn't pinch it
> | > anyware, same thing.  I installed a new "red-red-red" resistor, same
> | > thing.  I took out the resistor and labeled the zone as "no eol" but
> | > same thing.  I even tested the thing with a magnet -- it turned red,
> | > meaning it's working, but of course the panel ignored it.
> | > Now I'm just out of ideas?  I have the 12v power across power just
> | > like the manual -- plug #6 and the one directly next to zone 8, and
> | > certainly it's powered up.  I have it connected to zone 8 and the EOL
> | > is inline by plugging it into the smoke at the NO connection, then
> | > plugging the other end onto the yellow wire, which goes back to the
> | > panel of course, along with the green wire next to it at the adjacent
> | > terminal.  I even tried swapping them.
> | > Any ideas? ... maybe without getting too angry about semantics ...?
> | > =)
> |
> | To TN: Sounds like you have the eol resistor in series. It needs to be
> in
> | parallel with the last smoke detector. Also you need an end of line
> relay
> to
> | supervise power.
> |
> | To DIY everywhere: This is a perfect example or why you should call a
> | professional. Even with access to the manual, s/w, and correct advice
> from
> | pros here, this person still doesn't grasp the most rudimentary concepts
> of
> | wiring a smoke detector to a fire zone. Series? Parallel? What?
> | It's not rocket science, ya know.
> | js
> |
> |
> |
> |
>
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home