Re: Telular Telguard TG-1 & TG-4 Service Pricing

["Mark Leuck" <m..leuck@xxxxxxxxx>]

<racerx90@xxxxxxxxx> wrote in message
news:1169616705.980680.114960@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I was doing some surfing just now, and noticed there's actually a
> digital (GSM) version of the older Uplink 1650 with pass-thru's for the
> RJ31x jack like the Telguard RG-4. It's made by Stealth Laboratories
> and is based off of the Uplink AnyNet. From what I read on their web
> site it looks like it should provide full CID reporting without having
> the need to hook it up directly via serial. Here's a link:
> http://www.stealthlabs.com/GSM1650Instructions.pdf.

I'm aware of that and Elk offers a similar option but it still requires
enabling the Uplink to report CID via their web page

>
> The good part is that it should be very simple to hook into my Caddx
> system and I also know of a few monitoring companies that will activate
> this for me. I'm going to call them tomorrow to get more details since
> none of their dealer links actually provide any information on the unit
> (although the documentation is dated 12/26/06 so it looks to be fairly
> new) or the price.
>
> This might be a good solution based on the AnyNet unit.
>
> On Jan 23, 11:01 pm, "Mark Leuck" <m..le...@xxxxxxxxx> wrote:
> > <racer...@xxxxxxxxx> wrote in
messagenews:1169602019.637628.314440@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >
> > > I'm pretty sure the only way you can get the Uplink AnyNet to do CID
> > > reporting is hooking up the Serial Port from the panel. I'd have to
> > > re-read the documentation, but I believe this is how it works (please
> > > correct me if I'm wrong here.)That would get you full reporting
however you also have to set the Uplink up
> > to transmit CID via Uplink's web page
> >
> >
> >
> >
> >
> >
> >
> > > I've found a few alarm service monitoring companies which uses Uplink
> > > so I don't think I'll run into the same problem I'm hitting with the
> > > Telguard.
> >
> > > On Jan 23, 7:33 pm, "Crash Gordon" <webmas...@xxxxxxxxxxxxxxxxxxxxx>
> > > wrote:
> > > > Not sure why you'd need serial port.
> >
> > > > You're gonna run into similar problem in that Uplink only sells
service
> > to
> > > > alarm dealers though.- Hide quoted text -- Show quoted text -
>