[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Installalation Tips and Tools

Subject: Re: Installalation Tips and Tools
From: "Bob Worthy" <securinc@xxxxxxxxxxxxx>
Date: Fri, 19 May 2006 09:30:24 -0400
Newsgroups: alt.security.alarms
References: <0kvag.5695$u4.464@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1147924954.156458.99680@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <U-Sdnaoyv51FZPbZ4p2dnA@xxxxxxxxxxx> <Jd9bg.294$K71.175@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <mhbbg.7207$Sh3.5810@trnddc05>

"Robert L Bass"  wrote in message >

> I like to use stranded cable for transformers.  It doesn't break like
solid
> core cable can if the wire is flexed a bunch of times.  Also, if I have
some
> in the tool kit I crimp spade lugs on the wires rather than wrap bare
wires
> around the screw terminals.  This isn't entirely necessary but it makes a
> good, solid connection and there's no chance of a stray strand shorting
the
> adjacent terminal.

Point  Click  Save to file  RLB/DBPR

 Regards

References:
- Installalation Tips and Tools
  - From: bdolph
- Re: Installalation Tips and Tools
  - From: Jim
- Re: Installalation Tips and Tools
  - From: J Barnes
- Re: Installalation Tips and Tools
  - From: bdolph
- Re: Installalation Tips and Tools
  - From: Robert L Bass

Prev by Message: Re: Honeywell/Ademco 15P Keypads and assessories needed
Next by Message: Re: Ultrasonic Sensors
Previous by thread: Re: Installalation Tips and Tools
Next by thread: Re: Installalation Tips and Tools
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home