Re: DSC 864 with 5500Z keypads

[<cel@xxxxxxxxxx>]

So are you saying that the buttons have to be locally set at the keypads?
How is it that the zone labels are downloaded to every keypad, but the other
stuff like buttons are not?

cel


"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:CrqdnbdWr-drSIHZnZ2dnUVZ_tmdnZ2d@xxxxxxxxxxxxxx
> True but he's talking about the buttons
>
> "J Barnes" <trishnjames@xxxxxxxxxxx> wrote in message
> news:heKdnQtJQ8RMI4HZRVn-tA@xxxxxxxxxxxxxx
> > if you didnt have a keypad in slot 8,  the labels would not be
> programmable
> > from the downloader either. :(
> >
> > James
> >
> > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> > news:TsSdnVDzn-1iCoHZRVn-qg@xxxxxxxxxxxxxx
> > > You have to go into programming on each keypad and set that in
location
> > > 000
> > >
> > > <cel@xxxxxxxxxx> wrote in message
> > > news:M5CdnURbpJDRw4HZnZ2dnUVZ_vSdnZ2d@xxxxxxxxxxxxxx
> > >> Yes they are enrolled, slot 6,7,8. I believe only #8 is getting the
key
> > >> assignments. It is strange that they all get the zone label
downloaded
> > >> OK.
> > >>
> > >> cel
> > >>
> > >> "Devin" <youdontneedit@xxxxxxxxxxxxx> wrote in message
> > >> news:OnWSf.54$I13.18@xxxxxxxxxxxxxxx
> > >> > cel@xxxxxxxxxx wrote:
> > >> > > I have used the DSC windows software to program the keypad
buttons,
> > >> > > to
> > >> stay,
> > >> > > away, chime, reset, and exit. These work fine on one of the
> keypads,
> > > but
> > >> on
> > >> > > the other 2 keypads the buttons do other things. Do these buttons
> > >> > > have
> > >> to be
> > >> > > programmed on the keypads themselves? I was hoping that any
setting
> I
> > >> would
> > >> > > do with the software would get sent to all of the keypads on the
> > > system.
> > >> > >
> > >> > > cel
> > >> > >
> > >> > >
> > >> > Each keypad has its own address, If i remember right section 000
has
> a
> > >> > subsection for each keypad.
> > >>
> > >>
> > >
> > >
> >
> >
>
>