[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC 864 with 5500Z keypads

Subject: Re: DSC 864 with 5500Z keypads
From: Devin <youdontneedit@xxxxxxxxxxxxx>
Date: Sat, 18 Mar 2006 10:17:17 -0600
Newsgroups: alt.security.alarms
References: <ncOdnegbO89dNobZnZ2dnUVZ_uidnZ2d@xxxxxxxxxxx>

cel@xxxxxxxxxx wrote:
> I have used the DSC windows software to program the keypad buttons, to stay,
> away, chime, reset, and exit. These work fine on one of the keypads, but on
> the other 2 keypads the buttons do other things. Do these buttons have to be
> programmed on the keypads themselves? I was hoping that any setting I would
> do with the software would get sent to all of the keypads on the system.
>
> cel
>
>
Each keypad has its own address, If i remember right section 000 has a
subsection for each keypad.

Follow-Ups:
- Re: DSC 864 with 5500Z keypads
  - From: cel

References:
- DSC 864 with 5500Z keypads
  - From: cel

Prev by Message: Re: Quick opinion poll regarding Bass' multiple "PR" posts
Next by Message: Re: good place to buy hardware
Previous by thread: Re: DSC 864 with 5500Z keypads
Next by thread: Re: DSC 864 with 5500Z keypads
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home