[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Can a Napco system & DSL connection co-exist?
have you ever heard of pci dsl card?
here's a few
http://shopping.kelkoo.co.uk/b/a/ss_adsl_pci.html
used alot around here..
and yes this can happen,what will your insurance company will do if one of
your customer is in the situation..and what will be your liability?
when we all know that there are some device that are made to ensure good
functioning of both dsl connection and alarm panel?
all this to save 30.00$
and one other thing..lets say your customer after 3 years of not using that
nifty little plug where he could have plug a telephone in the back of this
dsl modem,but that you told him for what so ever obscure reason not to do
so,but he would really need the plug..he is tired of lifting his fat ass
from his chair(must have a website selling whatever stuff he doesn't have a
clue about)every time the phone ring..while he is in front of his puter..he
will plug a phone there..and when my crazy theft will come in and move all
the unusefull stuff from the desk that phone will be open and prevent
communication with the alarm central..
oups..too bad you didn't told your customer to use a small dsl filter for
rj31x...
act like a pro and use the good tool for the job...
"FIRETEK" <firetech(change-the-ch-to-k)@telus.net> a écrit dans le message
de news: VvUUf.7087$%H.885@xxxxxxxxxxx
> You're splitting hairs. I've noticed this is a popular pursuit in this
> Newsgroup. Chances are remote that any thief is going to rip out the
> wires
> for the DSL modem if he's after the computer. The only thing plugged into
> the computer at this point is the network cable to the modem. A short
> here
> won't affect the phone line.
>
> Regards,
>
> Frank
>
> "petem" <petem001@xxxxxxxxx> wrote in message
> news:k8RUf.20571$%N6.293612@xxxxxxxxxxxxxxxxxxxxxx
>> Frank be careful,if the line is split in any ways before the alarm
>> panel,there is a possibility that if this splice get shorted or whatever
> the
>> alarm panel wont be able to call the central station...
>>
>> the only correct way to connect a line to an alarm panel is using a rj31x
> at
>> the demark point and then feeding from there the rest of the house..
>>
>> lets say that the theft that just came in got to the computer of the
>> house
>> first,before the entry delay end,and rip the DSL modem from the desk and
>> doing so short the phone line,what will happen? what will you say to your
>> assurance company?
>>
>>
>> "FIRETEK" <firetech(change-the-ch-to-k)@telus.net> a écrit dans le
>> message
>> de news: DwKUf.1669$B_1.1407@xxxxxxxxxxx
>> > If you take a moment to read the OP's post, the connection diagram he
>> > supplied is the correct way to terminate an alarm system/dsl modem.
>> > The
>> > alarm will be able to communicate status and alarm messages without
>> > interfering with the Internet connection. Mr. Bass is correct in this
>> > instance. The OP doesn't need to purchase the extra filter.
>> >
>> > Regards,
>> >
>> > Frank
>> >
>> > "grabbitt" <sn@xxxxx> wrote in message
>> > news:AZ1Uf.339$yn4.303@xxxxxxxxxxxxxxxxxxxxxxxxx
>> >>
>> >> "Robert L Bass" <sales@xxxxxxxxxxxxxxxxxxxx> wrote in message
>> >> news:ped022lq0sd2rdt8curp7iabt17uqltmt4@xxxxxxxxxx
>> >> > Wrong advice. The gentleman is trying to make sure his DSL
>> >> > doesn't go down during Napco's transmission. The plug-in DSL
>> >> > filter will not work for him.
>> >> >
>> >> >> You can also purchase these online.
>> >> >
>> >> > I sell them online but this gentleman doesn't need one. He's
>> >> > better off using the split filter arrangement.
>> >>
>> >>
>> >> your age is really starting to show in your posts these last few
>> >> years.
>> > Or
>> >> is it just that you haven't actually done any low voltage work in many
>> >> years. Or is it that you just are a bullsh---er at heart. Or are you
>> > just
>> >> trying to sound like you are important, or are you just trying to
> disrupt
>> >> the GROUP?
>> >> Here is cut and paste from Excelsus Technologies website, makers of
>> >> the
>> >> device I recommended.
>> >>
>> >> Z-A431PJ31X-A Alarm Panel DSL Filter (RJ31X)
>> >>
>> >> Description
>> >> Designed specifically for homes with alarm systems, the
>> >> Z-A431PJ31X-A alarm filter keeps DSL service, home phoneline
>> >> networking
>> >> (HPN) and alarm systems functioning as they should. The alarm filter
>> > blocks
>> >> DSL and HPN signals from interfering with the alarm system's
>> >> voice-band
>> >> modem. At the same time, it isolates DSL and HPN equipment from alarm
>> >> equipment impedances. With this two-way protection, the alarm filter
>> >> keeps
>> >> the alarm system operating reliably around the clock and ensures fast,
>> >> uninterrupted DSL and HPN access even while the alarm system is
> dialing.
>> >>
>> >>
>> >>
>> >> Notice how it states that the DSL stays up while alarm
> system
>> >> communicates. Now what was that you said about "wrong advice"? Did
> you
>> >> mean your advice was wrong?
>> >>
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>
>
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home