Re: DSC-Cross Zone Police Code Alarm PROBLEM RESOLVED -THANKS

[oldmantrying@xxxxxxxxxxx]

To All, Again - thanks for your help.

As I said Problem is RESOLVED.  The central station DID get E140
today.

 It is likely the CS got the code in previous tests BUT before  too
many alarm, and other events, muddied the waters. My simple test today
made it easier for the CS to see the  cross zone code.

Your suggestions will also help me debug similar problems if they
occur in the future.

This newsgroup has been a great resource to learn more about my
system.

On Thu, 22 Jun 2006 09:25:49 -0700, "Doug L" <vssdoug@xxxxxxx> wrote:

>Assuming that you have contact ID programmmed in both locations in 360, you
>have 361 option 1 as on ,that you don't have the system partitioned and you
>don't have transmission delay enabled in the zone attributes, then I would
>try changing section 363 option 1 and 368 option 1 to on, if that doesn't
>help then you could try  another code in section 328 instead of 4A such as
>33 just to see if the CS is mishandling 4A
>
>Doug L