Re: Caddx/Ademco Downloading

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

"Roland Moore" <roland@xxxxxxxxxxxx> wrote in message
news:GEqfh.4346$GB1.3409@xxxxxxxxxxxxxxxxxxxxxxx
> I got an email from DC that has a lot of helpful hints. I think I'll try
> them (and yours) and hopefully I can get rid of the selector switch.
> Thanks again.

You'll never get rid of the selector switch, god knows I've tried

> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> news:cumfh.22181$%u3.10603@xxxxxxxxxxxxxxxxxxxxxxxxxx
> > Install DLS3. Install the unsupported modems patch. Then upgrade to
> > DLS2002. Then all the modems will show up in DLS2002.
> >
> > Jim Rojas
> >
> >
> >
> > "Roland" <roland@xxxxxxxxxxxx> wrote in message
> > news:0pmfh.9070$qp1.5706@xxxxxxxxxxxxxxxxxxxxxxx
> >>I did see that described anywhere. Is that what you are calling the
> >>Generic 56K? Is that a different generic driver available elsewhere?
Could
> >>you give me a hint of where to look?
> >>
> >> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> >> news:J6mfh.10295$yj1.5732@xxxxxxxxxxxxxxxxxxxxxxxxxx
> >>> You will need to install the unsupported modem drivers.
> >>>
> >>> Jim Rojas
> >>>
> >>>
> >>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> >>> news:c3mfh.8774$qp1.4989@xxxxxxxxxxxxxxxxxxxxxxx
> >>>>I looked at the DLS software ( DLS 2002 version 2.0x - the web update
> >>>>utility says it's the latest) and I didn't see the Hayes 2400.
> >>>> I saw the:
> >>>> Generic 56K
> >>>> Practical Peripheral 1200 Sa External
> >>>> Stradcom Pocket Modem
> >>>> US Robotics 56K
> >>>> Any hints on which of those to use?
> >>>>
> >>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> >>>> news:2dlfh.10291$yj1.8785@xxxxxxxxxxxxxxxxxxxxxxxxxx
> >>>>> Yes, that is correct. The DL110 emulates the Hayes 2400. I got mine
to
> >>>>> work fine on DSC, Napco, Ademco, GE, Caddx, Radionics, plus many
> >>>>> others.
> >>>>>
> >>>>> Jim Rojas
> >>>>>
> >>>>>
> >>>>>
> >>>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> >>>>> news:U3lfh.8072$qp1.5396@xxxxxxxxxxxxxxxxxxxxxxx
> >>>>>> You know I have a few of the Bosch modems from DC Security
Products.
> >>>>>> I have DSC, Ademco, Napco etc. panels that I download but I use a
> >>>>>> separate modem for each. I never experimented to see if the Bosch
(DC
> >>>>>> Security Products) modem is the exact same or just slightly
different
> >>>>>> than the regular DC 110. In any case when I use the wrong software
> >>>>>> and init string without switching the dial to the right modem it
> >>>>>> never works. So I know I have been stupid all these years, but
you're
> >>>>>> telling me I don't need a separate MD-12 for DSC or CIA (or Hayes)
> >>>>>> for Ademco (Honeywell) or a Hayes for Napco etc. I can use the DC
110
> >>>>>> for all of them (if I input the correct init string)? Does it work
on
> >>>>>> every panel or is it a goofy work around that just works on some
> >>>>>> panels?
> >>>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> >>>>>> news:Tkifh.10285$yj1.1941@xxxxxxxxxxxxxxxxxxxxxxxxxx
> >>>>>>>I have a few DC Security DL110 modems that work well with Ademco,
> >>>>>>>Caddx, plus many, many more panels. The modem sells for $275, and
its
> >>>>>>>new.
> >>>>>>>
> >>>>>>> Jim Rojas
> >>>>>>>
> >>>>>>>
> >>>>>>> "Don" <don@xxxxxx> wrote in message
> >>>>>>> news:b4ifh.5037$uY1.2709@xxxxxxxxxxxxxxxxxxxxxxxxx
> >>>>>>>>
> >>>>>>>> "whppas" <u30140@uwe> wrote in message news:6a9ce516a7a30@xxxxxx
> >>>>>>>>> Is this modem simular to the old Hayes I was using and I would
> >>>>>>>>> maybe look on
> >>>>>>>>> line for it as used.
> >>>>>>>> si
> >>>>>>>> doesn't ademco sell a modem that works with compass?
> >>>>>>>> Isn't there a new special modem made just for this purpose that
> >>>>>>>> someone was referring to in this newsgroup?
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>