[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Caddx/Ademco Downloading



I did see that described anywhere. Is that what you are calling the Generic
56K? Is that a different generic driver available elsewhere? Could you give
me a hint of where to look?

"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:J6mfh.10295$yj1.5732@xxxxxxxxxxxxxxxxxxxxxxxxxx
> You will need to install the unsupported modem drivers.
>
> Jim Rojas
>
>
> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> news:c3mfh.8774$qp1.4989@xxxxxxxxxxxxxxxxxxxxxxx
>>I looked at the DLS software ( DLS 2002 version 2.0x - the web update
>>utility says it's the latest) and I didn't see the Hayes 2400.
>> I saw the:
>> Generic 56K
>> Practical Peripheral 1200 Sa External
>> Stradcom Pocket Modem
>> US Robotics 56K
>> Any hints on which of those to use?
>>
>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>> news:2dlfh.10291$yj1.8785@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>> Yes, that is correct. The DL110 emulates the Hayes 2400. I got mine to
>>> work fine on DSC, Napco, Ademco, GE, Caddx, Radionics, plus many others.
>>>
>>> Jim Rojas
>>>
>>>
>>>
>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
>>> news:U3lfh.8072$qp1.5396@xxxxxxxxxxxxxxxxxxxxxxx
>>>> You know I have a few of the Bosch modems from DC Security Products. I
>>>> have DSC, Ademco, Napco etc. panels that I download but I use a
>>>> separate modem for each. I never experimented to see if the Bosch (DC
>>>> Security Products) modem is the exact same or just slightly different
>>>> than the regular DC 110. In any case when I use the wrong software and
>>>> init string without switching the dial to the right modem it never
>>>> works. So I know I have been stupid all these years, but you're telling
>>>> me I don't need a separate MD-12 for DSC or CIA (or Hayes) for Ademco
>>>> (Honeywell) or a Hayes for Napco etc. I can use the DC 110 for all of
>>>> them (if I input the correct init string)? Does it work on every panel
>>>> or is it a goofy work around that just works on some panels?
>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>>> news:Tkifh.10285$yj1.1941@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>I have a few DC Security DL110 modems that work well with Ademco,
>>>>>Caddx, plus many, many more panels. The modem sells for $275, and its
>>>>>new.
>>>>>
>>>>> Jim Rojas
>>>>>
>>>>>
>>>>> "Don" <don@xxxxxx> wrote in message
>>>>> news:b4ifh.5037$uY1.2709@xxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>>
>>>>>> "whppas" <u30140@uwe> wrote in message news:6a9ce516a7a30@xxxxxx
>>>>>>> Is this modem simular to the old Hayes I was using and I would maybe
>>>>>>> look on
>>>>>>> line for it as used.
>>>>>> si
>>>>>> doesn't ademco sell a modem that works with compass?
>>>>>> Isn't there a new special modem made just for this purpose that
>>>>>> someone was referring to in this newsgroup?
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home