Re: Caddx/Ademco Downloading

["Jim Rojas" <jrojas@xxxxxxxxxxxx>]

Install DLS3. Install the unsupported modems patch. Then upgrade to DLS2002.
Then all the modems will show up in DLS2002.

Jim Rojas



"Roland" <roland@xxxxxxxxxxxx> wrote in message
news:0pmfh.9070$qp1.5706@xxxxxxxxxxxxxxxxxxxxxxx
>I did see that described anywhere. Is that what you are calling the Generic
>56K? Is that a different generic driver available elsewhere? Could you give
>me a hint of where to look?
>
> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> news:J6mfh.10295$yj1.5732@xxxxxxxxxxxxxxxxxxxxxxxxxx
>> You will need to install the unsupported modem drivers.
>>
>> Jim Rojas
>>
>>
>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
>> news:c3mfh.8774$qp1.4989@xxxxxxxxxxxxxxxxxxxxxxx
>>>I looked at the DLS software ( DLS 2002 version 2.0x - the web update
>>>utility says it's the latest) and I didn't see the Hayes 2400.
>>> I saw the:
>>> Generic 56K
>>> Practical Peripheral 1200 Sa External
>>> Stradcom Pocket Modem
>>> US Robotics 56K
>>> Any hints on which of those to use?
>>>
>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>> news:2dlfh.10291$yj1.8785@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>>> Yes, that is correct. The DL110 emulates the Hayes 2400. I got mine to
>>>> work fine on DSC, Napco, Ademco, GE, Caddx, Radionics, plus many
>>>> others.
>>>>
>>>> Jim Rojas
>>>>
>>>>
>>>>
>>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
>>>> news:U3lfh.8072$qp1.5396@xxxxxxxxxxxxxxxxxxxxxxx
>>>>> You know I have a few of the Bosch modems from DC Security Products. I
>>>>> have DSC, Ademco, Napco etc. panels that I download but I use a
>>>>> separate modem for each. I never experimented to see if the Bosch (DC
>>>>> Security Products) modem is the exact same or just slightly different
>>>>> than the regular DC 110. In any case when I use the wrong software and
>>>>> init string without switching the dial to the right modem it never
>>>>> works. So I know I have been stupid all these years, but you're
>>>>> telling me I don't need a separate MD-12 for DSC or CIA (or Hayes) for
>>>>> Ademco (Honeywell) or a Hayes for Napco etc. I can use the DC 110 for
>>>>> all of them (if I input the correct init string)? Does it work on
>>>>> every panel or is it a goofy work around that just works on some
>>>>> panels?
>>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>>>> news:Tkifh.10285$yj1.1941@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>>I have a few DC Security DL110 modems that work well with Ademco,
>>>>>>Caddx, plus many, many more panels. The modem sells for $275, and its
>>>>>>new.
>>>>>>
>>>>>> Jim Rojas
>>>>>>
>>>>>>
>>>>>> "Don" <don@xxxxxx> wrote in message
>>>>>> news:b4ifh.5037$uY1.2709@xxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>
>>>>>>> "whppas" <u30140@uwe> wrote in message news:6a9ce516a7a30@xxxxxx
>>>>>>>> Is this modem simular to the old Hayes I was using and I would
>>>>>>>> maybe look on
>>>>>>>> line for it as used.
>>>>>>> si
>>>>>>> doesn't ademco sell a modem that works with compass?
>>>>>>> Isn't there a new special modem made just for this purpose that
>>>>>>> someone was referring to in this newsgroup?
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>