Re: Caddx/Ademco Downloading

["Roland Moore" <roland@xxxxxxxxxxxx>]

I got an email from DC that has a lot of helpful hints. I think I'll try
them (and yours) and hopefully I can get rid of the selector switch.
Thanks again.
"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:cumfh.22181$%u3.10603@xxxxxxxxxxxxxxxxxxxxxxxxxx
> Install DLS3. Install the unsupported modems patch. Then upgrade to
> DLS2002. Then all the modems will show up in DLS2002.
>
> Jim Rojas
>
>
>
> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> news:0pmfh.9070$qp1.5706@xxxxxxxxxxxxxxxxxxxxxxx
>>I did see that described anywhere. Is that what you are calling the
>>Generic 56K? Is that a different generic driver available elsewhere? Could
>>you give me a hint of where to look?
>>
>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>> news:J6mfh.10295$yj1.5732@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>> You will need to install the unsupported modem drivers.
>>>
>>> Jim Rojas
>>>
>>>
>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
>>> news:c3mfh.8774$qp1.4989@xxxxxxxxxxxxxxxxxxxxxxx
>>>>I looked at the DLS software ( DLS 2002 version 2.0x - the web update
>>>>utility says it's the latest) and I didn't see the Hayes 2400.
>>>> I saw the:
>>>> Generic 56K
>>>> Practical Peripheral 1200 Sa External
>>>> Stradcom Pocket Modem
>>>> US Robotics 56K
>>>> Any hints on which of those to use?
>>>>
>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>>> news:2dlfh.10291$yj1.8785@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>> Yes, that is correct. The DL110 emulates the Hayes 2400. I got mine to
>>>>> work fine on DSC, Napco, Ademco, GE, Caddx, Radionics, plus many
>>>>> others.
>>>>>
>>>>> Jim Rojas
>>>>>
>>>>>
>>>>>
>>>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
>>>>> news:U3lfh.8072$qp1.5396@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>> You know I have a few of the Bosch modems from DC Security Products.
>>>>>> I have DSC, Ademco, Napco etc. panels that I download but I use a
>>>>>> separate modem for each. I never experimented to see if the Bosch (DC
>>>>>> Security Products) modem is the exact same or just slightly different
>>>>>> than the regular DC 110. In any case when I use the wrong software
>>>>>> and init string without switching the dial to the right modem it
>>>>>> never works. So I know I have been stupid all these years, but you're
>>>>>> telling me I don't need a separate MD-12 for DSC or CIA (or Hayes)
>>>>>> for Ademco (Honeywell) or a Hayes for Napco etc. I can use the DC 110
>>>>>> for all of them (if I input the correct init string)? Does it work on
>>>>>> every panel or is it a goofy work around that just works on some
>>>>>> panels?
>>>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>>>>> news:Tkifh.10285$yj1.1941@xxxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>I have a few DC Security DL110 modems that work well with Ademco,
>>>>>>>Caddx, plus many, many more panels. The modem sells for $275, and its
>>>>>>>new.
>>>>>>>
>>>>>>> Jim Rojas
>>>>>>>
>>>>>>>
>>>>>>> "Don" <don@xxxxxx> wrote in message
>>>>>>> news:b4ifh.5037$uY1.2709@xxxxxxxxxxxxxxxxxxxxxxxxx
>>>>>>>>
>>>>>>>> "whppas" <u30140@uwe> wrote in message news:6a9ce516a7a30@xxxxxx
>>>>>>>>> Is this modem simular to the old Hayes I was using and I would
>>>>>>>>> maybe look on
>>>>>>>>> line for it as used.
>>>>>>>> si
>>>>>>>> doesn't ademco sell a modem that works with compass?
>>>>>>>> Isn't there a new special modem made just for this purpose that
>>>>>>>> someone was referring to in this newsgroup?
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>