Re: Caddx/Ademco Downloading

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

Or save all the modem strings from DLS3 and dump them into the DLS2002 modem
directory

"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:cumfh.22181$%u3.10603@xxxxxxxxxxxxxxxxxxxxxxxxxx
> Install DLS3. Install the unsupported modems patch. Then upgrade to
DLS2002.
> Then all the modems will show up in DLS2002.
>
> Jim Rojas
>
>
>
> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> news:0pmfh.9070$qp1.5706@xxxxxxxxxxxxxxxxxxxxxxx
> >I did see that described anywhere. Is that what you are calling the
Generic
> >56K? Is that a different generic driver available elsewhere? Could you
give
> >me a hint of where to look?
> >
> > "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> > news:J6mfh.10295$yj1.5732@xxxxxxxxxxxxxxxxxxxxxxxxxx
> >> You will need to install the unsupported modem drivers.
> >>
> >> Jim Rojas
> >>
> >>
> >> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> >> news:c3mfh.8774$qp1.4989@xxxxxxxxxxxxxxxxxxxxxxx
> >>>I looked at the DLS software ( DLS 2002 version 2.0x - the web update
> >>>utility says it's the latest) and I didn't see the Hayes 2400.
> >>> I saw the:
> >>> Generic 56K
> >>> Practical Peripheral 1200 Sa External
> >>> Stradcom Pocket Modem
> >>> US Robotics 56K
> >>> Any hints on which of those to use?
> >>>
> >>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> >>> news:2dlfh.10291$yj1.8785@xxxxxxxxxxxxxxxxxxxxxxxxxx
> >>>> Yes, that is correct. The DL110 emulates the Hayes 2400. I got mine
to
> >>>> work fine on DSC, Napco, Ademco, GE, Caddx, Radionics, plus many
> >>>> others.
> >>>>
> >>>> Jim Rojas
> >>>>
> >>>>
> >>>>
> >>>> "Roland" <roland@xxxxxxxxxxxx> wrote in message
> >>>> news:U3lfh.8072$qp1.5396@xxxxxxxxxxxxxxxxxxxxxxx
> >>>>> You know I have a few of the Bosch modems from DC Security Products.
I
> >>>>> have DSC, Ademco, Napco etc. panels that I download but I use a
> >>>>> separate modem for each. I never experimented to see if the Bosch
(DC
> >>>>> Security Products) modem is the exact same or just slightly
different
> >>>>> than the regular DC 110. In any case when I use the wrong software
and
> >>>>> init string without switching the dial to the right modem it never
> >>>>> works. So I know I have been stupid all these years, but you're
> >>>>> telling me I don't need a separate MD-12 for DSC or CIA (or Hayes)
for
> >>>>> Ademco (Honeywell) or a Hayes for Napco etc. I can use the DC 110
for
> >>>>> all of them (if I input the correct init string)? Does it work on
> >>>>> every panel or is it a goofy work around that just works on some
> >>>>> panels?
> >>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> >>>>> news:Tkifh.10285$yj1.1941@xxxxxxxxxxxxxxxxxxxxxxxxxx
> >>>>>>I have a few DC Security DL110 modems that work well with Ademco,
> >>>>>>Caddx, plus many, many more panels. The modem sells for $275, and
its
> >>>>>>new.
> >>>>>>
> >>>>>> Jim Rojas
> >>>>>>
> >>>>>>
> >>>>>> "Don" <don@xxxxxx> wrote in message
> >>>>>> news:b4ifh.5037$uY1.2709@xxxxxxxxxxxxxxxxxxxxxxxxx
> >>>>>>>
> >>>>>>> "whppas" <u30140@uwe> wrote in message news:6a9ce516a7a30@xxxxxx
> >>>>>>>> Is this modem simular to the old Hayes I was using and I would
> >>>>>>>> maybe look on
> >>>>>>>> line for it as used.
> >>>>>>> si
> >>>>>>> doesn't ademco sell a modem that works with compass?
> >>>>>>> Isn't there a new special modem made just for this purpose that
> >>>>>>> someone was referring to in this newsgroup?
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>