Re: Ademco 4110 Engineer manual question

["SantaUK" <santa@xxxxxxxxxx>]

Next time I'm at it, I'll take note of the ROM chip and report its details.
But it def says 4110 - but after that I don't know.

Thanks

--
Regards


M Millar

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:TF84f.7$q47.315@xxxxxxxxxxxxxxxxxx
> Thats weird.
> Still not sure what alarm panel you're really working with so it's hard to
> tell.
>
>
> "SantaUK" <santa@xxxxxxxxxx> wrote in message
> news:4350bf54$0$19000$c3e8da3@xxxxxxxxxxxxxxxxxxxx
> | Thats the manual I had for this, seems very similar.  Further into the
> | manual, it mentions if this is fitted, then you can't use the latch
> facility
> | for detectors, so you need to switch one of the menuoptions to a
> different
> | value.  I'm hoping that I have got the wrong option number and it isn't
> | faulty.
> |
> | --
> | Regards
> |
> |
> | M Millar
> |
> | "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> | news:c%X3f.285$984.14338@xxxxxxxxxxxxxxxxxx
> | >I found reference to the 4110SM speaker module as it relates to a VISTA
> | > 25..this looks like a UK product..but this is all I found:
> | >
> | > The 4110SM speaker module plugs directly onto the PLJ connector on the
> | > Vista
> | > 25PCB, providing an output for a 16 ? loudspeaker. Once connected, the
> | > loudspeakerwill respond to Entry/Exit and Alarm conditions.If more
> than
> | > one
> | > loudspeaker is required the
> | > connections should be arranged suchthat the resistance across the
> | > terminals
> | > P1
> | > and P2 is 16 ?, e.g. two 8 ? loudspeakersin series.When connecting the
> | > speaker
> | > module, the adhesive pad should be used to allowbonding to the Vista
> 25
> | > PCB.
> | > Once connected the tone of the loudspeaker can bevaried by adjusting
> the
> | > potentiometer, VR1. See Figure 3.4 4110SM Speaker Modulefor
> details.Figure
> | > 3.44110SM Speaker Module
> | >
> | >
> | >
> | > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> | > news:K4udnS64gqgtq83eRVn-hg@xxxxxxxxxxxxxx
> | > |
> | > | "SantaUK" <santa@xxxxxxxxxx> wrote in message
> | > | news:434fec45$0$1592$c3e8da3@xxxxxxxxxxxxxxxxxxxx
> | > | > There is, well on the Vista's which I believe are the same panels.
> | > Its
> | > | the
> | > | > menu option number I am looking for, as soon as I connect the
> cable
> | > the
> | > | > sounder constantly activates, no matter in the set or unset mode.
> | > | >
> | > | > And the sound module is fitted straight onto the pins on the main
> | > board,
> | > | and
> | > | > can't be connected wrongly.  Do you have the manual by any chance?
> | > | >
> | > | > --
> | > | > Regards
> | > | >
> | > | >
> | > | > M Millar
> | > |
> | > | Pins on the main board? Exactly what pins and which 4110 do you
> have?
> | > 4110
> | > | Vantage?, 4110DL? 4110XM? 4110XMP?
> | > |
> | > |
> | > |
> | >
> | >
> |
> |
>
>