Re: Ademco 4110 Engineer manual question

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

Thats weird.
Still not sure what alarm panel you're really working with so it's hard to
tell.


"SantaUK" <santa@xxxxxxxxxx> wrote in message
news:4350bf54$0$19000$c3e8da3@xxxxxxxxxxxxxxxxxxxx
| Thats the manual I had for this, seems very similar.  Further into the
| manual, it mentions if this is fitted, then you can't use the latch
facility
| for detectors, so you need to switch one of the menuoptions to a different
| value.  I'm hoping that I have got the wrong option number and it isn't
| faulty.
|
| --
| Regards
|
|
| M Millar
|
| "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
| news:c%X3f.285$984.14338@xxxxxxxxxxxxxxxxxx
| >I found reference to the 4110SM speaker module as it relates to a VISTA
| > 25..this looks like a UK product..but this is all I found:
| >
| > The 4110SM speaker module plugs directly onto the PLJ connector on the
| > Vista
| > 25PCB, providing an output for a 16 ? loudspeaker. Once connected, the
| > loudspeakerwill respond to Entry/Exit and Alarm conditions.If more than
| > one
| > loudspeaker is required the
| > connections should be arranged suchthat the resistance across the
| > terminals
| > P1
| > and P2 is 16 ?, e.g. two 8 ? loudspeakersin series.When connecting the
| > speaker
| > module, the adhesive pad should be used to allowbonding to the Vista 25
| > PCB.
| > Once connected the tone of the loudspeaker can bevaried by adjusting the
| > potentiometer, VR1. See Figure 3.4 4110SM Speaker Modulefor
details.Figure
| > 3.44110SM Speaker Module
| >
| >
| >
| > "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
| > news:K4udnS64gqgtq83eRVn-hg@xxxxxxxxxxxxxx
| > |
| > | "SantaUK" <santa@xxxxxxxxxx> wrote in message
| > | news:434fec45$0$1592$c3e8da3@xxxxxxxxxxxxxxxxxxxx
| > | > There is, well on the Vista's which I believe are the same panels.
| > Its
| > | the
| > | > menu option number I am looking for, as soon as I connect the cable
| > the
| > | > sounder constantly activates, no matter in the set or unset mode.
| > | >
| > | > And the sound module is fitted straight onto the pins on the main
| > board,
| > | and
| > | > can't be connected wrongly.  Do you have the manual by any chance?
| > | >
| > | > --
| > | > Regards
| > | >
| > | >
| > | > M Millar
| > |
| > | Pins on the main board? Exactly what pins and which 4110 do you have?
| > 4110
| > | Vantage?, 4110DL? 4110XM? 4110XMP?
| > |
| > |
| > |
| >
| >
|
|