Re: Ademco 4110 Engineer manual question

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

I found reference to the 4110SM speaker module as it relates to a VISTA
25..this looks like a UK product..but this is all I found:

The 4110SM speaker module plugs directly onto the PLJ connector on the Vista
25PCB, providing an output for a 16 ? loudspeaker. Once connected, the
loudspeakerwill respond to Entry/Exit and Alarm conditions.If more than one
loudspeaker is required the
connections should be arranged suchthat the resistance across the terminals
P1
and P2 is 16 ?, e.g. two 8 ? loudspeakersin series.When connecting the
speaker
module, the adhesive pad should be used to allowbonding to the Vista 25 PCB.
Once connected the tone of the loudspeaker can bevaried by adjusting the
potentiometer, VR1. See Figure 3.4 4110SM Speaker Modulefor details.Figure
3.44110SM Speaker Module



"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:K4udnS64gqgtq83eRVn-hg@xxxxxxxxxxxxxx
|
| "SantaUK" <santa@xxxxxxxxxx> wrote in message
| news:434fec45$0$1592$c3e8da3@xxxxxxxxxxxxxxxxxxxx
| > There is, well on the Vista's which I believe are the same panels.  Its
| the
| > menu option number I am looking for, as soon as I connect the cable the
| > sounder constantly activates, no matter in the set or unset mode.
| >
| > And the sound module is fitted straight onto the pins on the main board,
| and
| > can't be connected wrongly.  Do you have the manual by any chance?
| >
| > --
| > Regards
| >
| >
| > M Millar
|
| Pins on the main board? Exactly what pins and which 4110 do you have? 4110
| Vantage?, 4110DL? 4110XM? 4110XMP?
|
|
|