[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: CADDX NX-6 question from homeowner

Subject: Re: CADDX NX-6 question from homeowner
From: "Mark Leuck" <m..leuck@xxxxxxxxxxx>
Date: Tue, 29 Mar 2005 17:49:18 -0600
Newsgroups: alt.security.alarms
References: <Lf6dnee6dMLhrtXfRVn_vg@xxxxxxxxxxxx> <6oKdnf59raHFpdXfRVn-1Q@xxxxxxxxxx> <Ke-dnYaGiaWOcdXfRVn-qg@xxxxxxxxxxxx> <D-idnUIEcOUf0tTfRVn-3Q@xxxxxxxxxx> <2id2e.2$Mq2.130@xxxxxxxxxxxxxxx> <dce2e.80421$Q83.23404@xxxxxxxxxxxxxxxxxxxxxx> <pOOdnVO3e_DyHdTfRVn-hw@xxxxxxxxxx> <hAf2e.12$y26.9@xxxxxxxxxxxxxxxxxxxxxx>

"DrPhil" <nospam@xxxxxxxxxx> wrote in message
news:hAf2e.12$y26.9@xxxxxxxxxxxxxxxxxxxxxxxxx
> R.H.Campbell wrote:
> > The point I was commenting on (perhaps too quickly) was based on my
> > assumption that the board was locked in hardware,
>
> can that be done on a NX panel?

The tech can do the following

1. Lock you out by installer code
2. Lock you out even if you have the installer code
3. Allow you to enter programming but not be able to change communicator
and/or downloading options
4.

References:
- CADDX NX-6 question from homeowner
  - From: RG
- Re: CADDX NX-6 question from homeowner
  - From: R.H.Campbell
- Re: CADDX NX-6 question from homeowner
  - From: Doug L
- Re: CADDX NX-6 question from homeowner
  - From: R.H.Campbell
- Re: CADDX NX-6 question from homeowner
  - From: Crash Gordon®
- Re: CADDX NX-6 question from homeowner
  - From: DrPhil
- Re: CADDX NX-6 question from homeowner
  - From: R.H.Campbell
- Re: CADDX NX-6 question from homeowner
  - From: DrPhil

Prev by Message: Re: 15% Off All Products
Next by Message: Re: cleaner wiring solution needed (resend)
Previous by thread: Re: CADDX NX-6 question from homeowner
Next by thread: Re: CADDX NX-6 question from homeowner
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home