Re: Question on Programming DCS PC5010

["TxNative" <TxNative@xxxxxxxxxxx>]

Thanks for the help Jim.
As you suggested, I reset everything and reprogrammed.
Now there is no error message. Not sure what was causing the error earlier
but it is gone now. I have compared printouts of both files and I can't find
any difference in the programming.
Thanks again for the help.


"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:fG4_d.9269$Z07.702@xxxxxxxxxxx
> Give me a call. I can help you out better that way.
>
> Jim Rojas
> (813) 884-6335 Cell
>
>
> "TxNative" <TxNative@xxxxxxxxxxx> wrote in message
> news:ol4_d.12771$WK2.9941@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> Thanks for the help.
>>
>> When I look at the "User Access Code" list, there is no code shown for
>> Part 1 Master. When I input a code for Part 1 Master it shows up as
>> Access Code #41 on the error log.
>>
>> Could Access Code #40 be the "System Master" access code?
>>
>> In the User Access Code List the box to the right of Systerm Master
>> indicating Partition 1 is marked NO. However, it is grayed out and I
>> can't get it to allow me to change it to YES.
>>
>> If this is the code giving me the problem, I have been unable to find
>> where to enable it for Part 1.
>>
>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>> news:h34_d.4363$UV2.1078@xxxxxxxxxxx
>>> Code 40 is the partition 1 master code.
>>>
>>> Next to the user code you will see a few check boxes. Make sure
>>> partition one is selected.
>>>
>>> Jim Rojas
>>>
>>>
>>> "TxNative" <TxNative@xxxxxxxxxxx> wrote in message
>>> news:5W3_d.16025$yp.4215@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>>> Programming a DCS PC5010 using DLS. Getting an error message "Access
>>>> code #40 has been programmed but is not assigned to any partition".
>>>> The only codes currently programmed are the Installer Code, Master
>>>> Code, and Downloading Access Code.
>>>> There are no User Access codes programmed.
>>>> What code is Access Code #40 ?
>>>> Any ideas on why I am getting the error?
>>>>
>>>> Thanks
>>>>
>>>
>>>
>>
>>
>
>